Pack (glove num)
10
Form
Conical
Designation
SM10700 H10 E11
Size
10
Length
700 mm
Hand shape
Ambidextrous
Glove port
156
Availability
Non standard
Special mechanical glove or mitt | 11/10 mm
Natural rubber
Natural rubber
GSPM H 11/10 mm
Special natural rubber mechanical protection mitt (polyisoprene). Excellent resistance to abrasion. Mitt used in particular for cleaning metal parts.
In compliance with the 2016/425 european regulation
(Category 2 P.P.E.)
Chemical composition
polyisoprene
Material code
H
Colour (s)
blond
Dimensional tolerances
Thickness: 11/10 mm (min 9/10, max palm 13/10). Length tolerance (+/- 20 mm).
Powdering
Standard: lightly powdered mitt.
Packaging
Individually packed in two-toned black and transparent, heat-sealed and easy-opening pouch. Pack of 10 units.
Care instructions
Store in the original packaging between +5°C and +25°C. Expiry date of 3 years in the original packaging. Wash with soapy water, rinse with clear water and then air-dry at a low temperature (<40°C).
Disinfectants
Mitt not suitable for this type of product.
Sterilisation
Not available in decontaminated or decontaminated-sterile version.
Treatment
Non-recyclable. Disposal as simple non-toxic waste if not contaminated by a hazardous substance.
Alcohols
Acids, bases
Strong oxidants
Uv, ozone, free radicals, natural ageing
Ketone solvents
Chlorinated solvents
Aromatic solvents
Aliphatic oils and solvents
Peracétic acid sterilisation (3%)
H2O2 Sterilisation (35%)
H2O2 Sterilisation (50%)
25-50 kGray gamma radiation
Autoclave sterilisation (121°c)
Protection from ionising radiation
non
100% Modulus
< 1.5 MPa
Tensile strength
> 20 MPa
Elongation at break
> 500%
Puncture
> 20 N
Temperature range
-40 To +80°C
Tear
Gas impermeability
Abrasion
Antistatic
non
Commercial service