Dry box glove | 7/10 mm
CSM/Polyurethane
CSM/Polyurethane
BAG Y/PUR 7/10 mm
Glove box glove MOUNTED ON A SUPPORT RING. This glove can be mounted on the glove box provided that the latter is equipped with an enclosure ring to receive this glove. Two layer polyurethane and chlorosulfonated polyethylene glove. The CSM layer is on the glove box side. Excellent chemical and mechanical properties. High resistance to ozone and UV. Good resistance to ionising radiation. Excellent resistance to disinfectants used in the pharmaceutical industry. The rim of the glove is made of CSM.
In compliance with the 2016/425 european regulation
(Category 3 P.P.E.)
Chemical composition
chlorosulfonated polyethylene/polyurethane
Material code
Y/PUR
Colour (s)
blue interior / white exterior
Dimensional tolerances
Thickness: 7/10 mm (min 5/10, max palm 9/10). Length tolerance (+/- 20 mm).
Powdering
Standard: lightly powdered gloves.
Packaging
Individually packed in two-toned black and transparent, heat-sealed and easy-opening pouch. Pack of 10 units.
Care instructions
Store in the original packaging between +5°C and +25°C. Expiry date of 3 years in the original packaging. Wash with soapy water, rinse with clear water and then air-dry at a low temperature (<40°C).
Disinfectants
Excellent resistance to the following disinfectants: Surfa Safe, 0.50% Hexanions G+R, 0.25% Surfanios, 0.50% Spetanios, 10% Soproper, 100% Soproper, Actril, 70% Isopropyl alcohol.
Sterilisation
Not available in decontaminated or decontaminated-sterile version.
Treatment
Non-recyclable. Disposal as simple non-toxic waste if not contaminated by a hazardous substance.
Alcohols
Acids, bases
Strong oxidants
Uv, ozone, free radicals, natural ageing
Ketone solvents
Chlorinated solvents
Aromatic solvents
Aliphatic oils and solvents
Peracétic acid sterilisation (3%)
H2O2 Sterilisation (35%)
H2O2 Sterilisation (50%)
25-50 kGray gamma radiation
Autoclave sterilisation (121°c)
Protection from ionising radiation
non
100% Modulus
< 3.0 MPa
Tensile strength
> 30 MPa
Elongation at break
> 500%
Puncture
> 60 N
Temperature range
-20 To +120°C
Tear
Gas impermeability
Abrasion
Antistatic
non
Commercial service