Isolator glove | 6/10 mm
EPDM black/EPDM white
EPDM black/EPDM white
ELS Eb/Ew 6/10 mm
Black and White EPDM glove (Ethylene Propylene Diene Monomer).Excellent chemical resistance and good mechanical properties.Electrostatic discharge dissipative glove compliant with EN 16350 standard.Performs exceptionally well under repeated exposure to disinfectants used in the pharmaceutical industry.Composition complies with the FDA positive list (CFR 21 § 177.2600).Specifically designed to meet the requirements of pharmaceutical laboratories thanks to its white outer color.
In compliance with the 2016/425 european regulation
(Category 3 P.P.E.)
Chemical composition
two layer epdm
Material code
Eb/Ew
Colour (s)
black and white
Dimensional tolerances
Thickness: 6/10 mm (min 4/10, max palm 7.5/10). Length tolerance (+/- 20 mm). Diameter of the rim: 5 mm (+/-1 mm).
Powdering
Standard: lightly powdered gloves.
Packaging
Individually packed in two-toned black and transparent, heat-sealed and easy-opening pouch.
Care instructions
Store in the original packaging between +5°C and +35°C. Expiry date of 3 years in the original packaging. Wash with soapy water, rinse with clear water and then air-dry at a low temperature (<40°C).
Disinfectants
Excellent resistance to the following disinfectants: 0.25% Surfanios, 0.50% Spetanios, 10% Soproper, 100% Soproper, 70% Isopropyl alcohol, Surfa Safe, Actril, 0.50% Henanios G+R. Good resistance to Klercide CR Biocid B.
Sterilisation
Not available in decontaminated or decontaminated-sterile version.
Treatment
Non-recyclable. Disposal as simple non-toxic waste if not contaminated by a hazardous substance.
Alcohols
Acids, bases
Strong oxidants
Uv, ozone, free radicals, natural ageing
Ketone solvents
Chlorinated solvents
Aromatic solvents
Aliphatic oils and solvents
Peracétic acid sterilisation (3%)
H2O2 Sterilisation (35%)
H2O2 Sterilisation (50%)
25-50 kGray gamma radiation
Autoclave sterilisation (121°c)
100% Modulus
< 2.5 MPa
Tensile strength
> 14 Mpa
Elongation at break
> 400%
Puncture
> 30 N
Temperature range
-30 To +120°C
Tear
Gas impermeability
Abrasion
Commercial service