Articles gants

TYPE
MATERIALS
THICKNESS
PHYSIOCHEMICAL PROPERTIES

Performance

Alcohols

Acids, bases

Strong oxidants

Uv, ozone

Ketone solvents

Chlorinated solvents

Aromatic solvents

Aliphatic oils and solvents

Peracétic acid sterilisation (3%)

H2O2 Sterilisation (35%)

H2O2 Sterilisation (50%)

25-55 kGray gamma radiation

Autoclave sterilisation

Protection from ionising radiation

MECHANICAL PROPERTIES

Performance

Dexterity

Tear

Gas impermeability

Abrasion

Antistatic

PRICING

Performance

Economic

Produit non trouvé.

Sleeve | 8/10 mm
Natural rubber

MAN H 8/10 mm

Natural rubber sleeve (polyisoprene). Good resistance to alcohols, reducing acids and diluted bases. Low cost.

Technical Sheet

Chemical composition
polyisoprene

Material code
H

Colour (s)
blond

Dimensional tolerances
Thickness: 8/10 mm (min 7/10, max 10/10). Length tolerance (+/- 20 mm). Diameter of the rim: 6 mm (+/-1 mm).

Powdering
Standard: lightly powdered sleeve.

Packaging
Individually packed in two-toned black and transparent, heat-sealed and easy-opening pouch. Pack of 10 units.

Care instructions
Store in the original packaging between +5°C and +25°C. Expiry date of 2 years in the original packaging. Wash with soapy water, rinse with clear water and then air-dry at a low temperature (<40°C).

Disinfectants
Excellent resistance to the following disinfectants: 0.25% Surfanios.

Sterilisation
Not available in decontaminated or decontaminated-sterile version.

Treatment
Non-recyclable. Disposal as simple non-toxic waste if not contaminated by a hazardous substance.

Alcohols

Acids, bases

Strong oxidants

Uv, ozone, free radicals, natural ageing

Ketone solvents

Chlorinated solvents

Aromatic solvents

Aliphatic oils and solvents

Peracétic acid sterilisation (3%)

H2O2 Sterilisation (35%)

H2O2 Sterilisation (50%)

25-50 kGray gamma radiation

Autoclave sterilisation (121°c)

Protection from ionising radiation

non

100% Modulus

< 1.5 MPa

Tensile strength

> 20 MPa

Elongation at break

> 500%

Temperature range

-40 To +80°C

Tear

Gas impermeability

Abrasion

Antistatic

non

All article references: MAN H 8/10 mm

Your search criteria:

6 articles

Non standardM130/90 H 450 E8 Bt6/6

Pack (glove num)

10

Designation

M130/90 H 450 E8 Bt6/6

Fixation

Bead

Length

450 mm

Bead

6 mm

Glove port

136

Availability

Non standard

Lower diameter

90 mm

Upper diameter

130 mm

Non standardM146/90 H 450 E8 Bt6/6

Pack (glove num)

10

Designation

M146/90 H 450 E8 Bt6/6

Fixation

Bead

Length

450 mm

Bead

6 mm

Glove port

156

Availability

Non standard

Lower diameter

90 mm

Upper diameter

146 mm

Non standardM172/90 H 480 E8 Bt6/6

Pack (glove num)

10

Designation

M172/90 H 480 E8 Bt6/6

Fixation

Bead

Length

480 mm

Bead

6 mm

Glove port

186

Availability

Non standard

Lower diameter

90 mm

Upper diameter

172 mm

Non standardM190/90 H 530 E8 Bt6/6

Pack (glove num)

10

Designation

M190/90 H 530 E8 Bt6/6

Fixation

Bead

Length

530 mm

Bead

6 mm

Glove port

220

Availability

Non standard

Lower diameter

90 mm

Upper diameter

190 mm

Non standardM230/90 H 530 E8 Bt6/6

Pack (glove num)

10

Designation

M230/90 H 530 E8 Bt6/6

Fixation

Bead

Length

530 mm

Bead

6 mm

Glove port

300

Availability

Non standard

Lower diameter

90 mm

Upper diameter

230 mm

Non standardM270/90 H 660 E8 Bt6/6

Pack (glove num)

10

Designation

M270/90 H 660 E8 Bt6/6

Fixation

Bead

Length

660 mm

Bead

6 mm

Glove port

350

Availability

Non standard

Lower diameter

90 mm

Upper diameter

270 mm