Pack (glove num)
10
Form
Conical
Designation
10750 BHP 7.5 E6 GJABS
Size
7.5
Fixation
BS
Length
750 mm
Bead
8 mm
Hand shape
Ambidextrous
Glove port
156
Availability
Standard
Dry box glove | 6/10 mm
High Butyl Properties
High Butyl Properties
BAG BHP 6/10 mm
Polyisoprene isobutylene glove box glove MOUNTED ON A SUPPORT RING. This glove can be mounted on the glove box on condition that the latter is equipped with an enclosure ring to accommodate this glove. Excellent impermeability to gases, good resistance to chemicals, ozone and UV. Electrostatic dissipative glove in accordance with EN 16350.
In compliance with the 2016/425 european regulation
(Category 3 P.P.E.)
Chemical composition
polyisoprene isobutylene with high level of properties
Material code
BHP
Colour (s)
black
Dimensional tolerances
Thickness: 6/10 mm (min 4/10, max palm 8/10). Length tolerance (+/- 20 mm).
Powdering
Standard: powder-free gloves.
Packaging
Individually packed in two-toned black and transparent, heat-sealed and easy-opening pouch. Pack of 10 units.
Care instructions
Store in the original packaging between +5°C and +25°C. Expiry date of 3 years in the original packaging. Wash with soapy water, rinse with clear water and then air-dry at a low temperature (<40°C).
Disinfectants
Excellent resistance to the following disinfectants: 0.25% Surfanios, 10% Soproper, 100% Soproper, 70% Isopropyl alcohol.
Sterilisation
Not available in decontaminated or decontaminated-sterile version.
Treatment
Non-recyclable. Disposal as simple non-toxic waste if not contaminated by a hazardous substance.
Alcohols
Acids, bases
Strong oxidants
Uv, ozone, free radicals, natural ageing
Ketone solvents
Chlorinated solvents
Aromatic solvents
Aliphatic oils and solvents
Peracétic acid sterilisation (3%)
H2O2 Sterilisation (35%)
H2O2 Sterilisation (50%)
25-50 kGray gamma radiation
Autoclave sterilisation (121°c)
Protection from ionising radiation
non
100% Modulus
< 2.5 MPa
Tensile strength
> 13 MPa
Elongation at break
> 400%
Puncture
> 20 N
Temperature range
-30 To +110°C
Tear
Gas impermeability
Abrasion
Antistatic
oui
7 articles
Pack (glove num)
10
Form
Conical
Designation
10750 BHP 8.5 E6 GJABS
Size
8.5
Fixation
BS
Length
750 mm
Bead
8 mm
Hand shape
Ambidextrous
Glove port
156
Availability
Standard
Pack (glove num)
10
Form
Conical
Designation
10750 BHP 9.5 E6 GJABS
Size
9.5
Fixation
BS
Length
750 mm
Bead
8 mm
Hand shape
Ambidextrous
Glove port
156
Availability
Standard
Pack (glove num)
8
Form
Conical
Designation
18750 BHP 10.5 E6 GJABS
Size
10.5
Fixation
BS
Length
750 mm
Bead
8 mm
Hand shape
Ambidextrous
Glove port
205
Availability
Standard
Pack (glove num)
8
Form
Conical
Designation
18750 BHP 8.5 E6 GJABS
Size
8.5
Fixation
BS
Length
750 mm
Bead
8 mm
Hand shape
Ambidextrous
Glove port
205
Availability
Standard
Pack (glove num)
8
Form
Conical
Designation
18750 BHP 9.5 E6 GJABS
Size
9.5
Fixation
BS
Length
750 mm
Bead
8 mm
Hand shape
Ambidextrous
Glove port
205
Availability
Standard
Pack (glove num)
10
Form
Telescopic
Designation
64750 BHP 9.5 E6 GJABS
Size
9.5
Fixation
BS
Length
750 mm
Bead
8 mm
Hand shape
Ambidextrous
Glove port
136
Availability
Standard
Commercial service