Dry box glove | 6/10 mm
EPDM black/EPDM white
EPDM black/EPDM white
BAG Eb/Ew 6/10 mm
Black EPDM and White EPDM (Ethylene Propylene Diene Monomer) glove MOUNTED ON A SUPPORT RING. This glove can be mounted on the glove box provided that the latter is equipped with an enclosure ring to receive this glove. Halogen and phthalate free. Excellent resistance to chemicals (H2O2, peracetic acid, etc.). Very good flexibility and precision. Composition in accordance with the FDA positive list (CFR 21 § 177.2600). High resistance to ozone and UV.
In compliance with the 2016/425 european regulation
(Category 3 P.P.E.)
Chemical composition
two layer epdm
Material code
Eb/Ew
Colour (s)
black and white
Dimensional tolerances
Thickness: 6/10 mm (min 4/10, max palm 7.5/10). Length tolerance (+/- 20 mm).
Powdering
Standard: lightly powdered gloves.
Packaging
Individually packed in two-toned black and transparent, heat-sealed and easy-opening pouch. Pack of 10 units.
Care instructions
Store in the original packaging between +5°C and +25°C. Expiry date of 3 years in the original packaging. Wash with soapy water, rinse with clear water and then air-dry at a low temperature (<40°C).
Disinfectants
Excellent resistance to the following disinfectants: 0.25% Surfanios, 0.50% Spetanios, 10% Soproper, 100% Soproper, 70% Isopropyl alcohol, Surfa Safe, Actril, 0.50% Henanios G+R. Good resistance to Klercide CR Biocid B.
Sterilisation
Not available in decontaminated or decontaminated-sterile version.
Treatment
Non-recyclable. Disposal as simple non-toxic waste if not contaminated by a hazardous substance.
Alcohols
Acids, bases
Strong oxidants
Uv, ozone, free radicals, natural ageing
Ketone solvents
Chlorinated solvents
Aromatic solvents
Aliphatic oils and solvents
Peracétic acid sterilisation (3%)
H2O2 Sterilisation (35%)
H2O2 Sterilisation (50%)
25-50 kGray gamma radiation
Autoclave sterilisation (121°c)
Protection from ionising radiation
non
100% Modulus
< 2.5 MPa
Tensile strength
> 14 Mpa
Elongation at break
> 400%
Puncture
> 20 N
Temperature range
-30 To +110°C
Tear
Gas impermeability
Abrasion
Antistatic
non
Commercial service